C-Flex Bearings - Double End Bearing

Double End Bearing
Bearing Sizes	Product Codes	Torsional Spring Rate(1)	Load (2) (Lc)	Capacity (2) (Lt)	Dia. +0 - 0.0005	A ± 0.003	C min	D min
1/8	AD-10	.0003	2.30	4.60	.1250	.200	.038	.070
1/8	AD-20	.0018	17.50	25.00	.1250	.200	.038	.070
1/8	AD-30	.0148	28.00	28.00	.1250	.200	.038	.070

5/32	BD-10	.0004	3.50	7.00	.1562	.250	.050	.100
5/32	BD-20	.0037	28.00	40.00	.1562	.250	.050	.100
5/32	BD-30	.0296	45.00	45.00	.1562	.250	.050	.100

3/16	CD-10	.0007	5.00	10.00	.1875	.300	.060	.120
3/16	CD-20	.0060	40.00	60.00	.1875	.300	.060	.120
3/16	CD-30	.0482	63.00	63.00	.1875	.300	.060	.120

1/4	DD-10	.0018	9.00	18.00	.250	.400	.083	.165
1/4	DD-20	.0148	70.00	100.00	.250	.400	.083	.165
1/4	DD-30	.1185	115.00	115.00	.250	.400	.083	.165

5/16	ED-10	.0037	14.00	28.00	.3125	.500	.105	.210
5/16	ED-20	.0296	110.00	150.00	.3125	.500	.105	.210
5/16	ED-30	.2367	175.00	175.00	.3125	.500	.105	.210

3/8	FD-10	.0065	20.00	40.00	.3750	.600	.128	.255
3/8	FD-20	.0482	160.00	220.00	.3750	.600	.128	.255
3/8	FD-30	.4002	250.00	250.00	.3750	.600	.128	.255

1/2	GD-10	.0148	35.00	70.00	.5000	.800	.173	.345
1/2	GD-20	.1185	280.00	380.00	.5000	.800	.173	.345
1/2	GD-30	.9486	450.00	450.00	.5000	.800	.173	.345

5/8	HD-10	.0296	55.00	110.00	.6250	1.000	.210	.430
5/8	HD-20	.2367	450.00	620.00	.6250	1.000	.210	.430
5/8	HD-30	1.8940	700.00	700.00	.6250	1.000	.210	.430

3/4	ID-10	.0482	80.00	160.00	.7500	1.200	.263	.520
3/4	ID-20	.4002	630.00	900.00	.7500	1.200	.263	.520
3/4	ID-30	3.2610	1000.00	1000.00	.7500	1.200	.263	.520

1	JD-10	.1185	140.00	280.00	1.000	1.600	.363	.720
1	JD-20	.9486	1100.00	1500.00	1.000	1.600	.363	.720
1	JD-30	7.8023	1800.00	1800.00	1.000	1.600	.363	.720

(1) Torsional Spring rates: Lb-In/Degree rates of standard C-Flex bearings generally fall within +/-10% of these values at zero load. Contact C-Flex if specific spring rates or closer tolerances are required.

(2) Load Capacity: Lt or Lc (Pounds load in tension or compression) These values are maximum loading (weight or static force) at zero deflection. Load requirements, angular deflection and cyclic life must be considered when sizing bearings. Click here for life expectancy curves or contact C-Flex for assistance. Lc is pure radial load creating compressive stresses in the spring, while Lt is a pure radial load creating tensile stresses.